Menu
Network Radar ReceiverRRNS10
| Features: | • | Receives video signal through long cable |
| • | Remote monitoring capability via Ethernet | |
| • | Digitized output to 8-bit | |
| • | DC supply for RADAR receiver | |
| • | Digital data output covering a wide dynamic range | |
| • | Offers wide range of AC input for military and commercial |
| Applications: | • | Monitoring signal strength of detector log amp. using any computer |
| • | 8-bit digital format output for further processing signal strength and data | |
| • | Digital format output for data collection over a wide dynamic range of receivers | |
| • | Test set for surveying airwave and calibration |
Specifications |
|||||
|---|---|---|---|---|---|
| Video Input speed | Up to 20 MHz | Power supply input | 90 to 250 V AC 50/60 Hz | ||
| Cable Length (Must be terminated with the same impedance of the cable @VID in.) |
Up to 250 ft. | Regulated Output | +12V | 700 mA Max. | |
| -12V | 250 mA Max. | ||||
| Audio Alarm Out Goes on > 80% of signal |
10W into 8 ohms | ||||
| I/O ports | RJ45 ethernet (USB 2.0 w/ adapter) | Operating Room Temp. | -20 to 70°C | ||
| I/O speed | RJ45 | 10 Mbps | Storage Temperatures | -40 to 85°C | |
| Optional USB 2.0 | 10 Mbps | This unit optionally comes with 1U rack mount. | |||
| Data Out | 60 Mbps | App Note #114 for more detail. | |||
| Data/Level Out | 8 bits, 30 Mbps | All digital outputs are TTL compatible | |||
| Capture instantaneous pulse measurement down to 40 nano sec. | |||||
| Hold time to 1%: 100 Micro sec. Min | |||||
| Monitor screen shot consists of bar graph representing signal strength | |||||